能源化学(英文) ›› 2013, Vol. 22 ›› Issue (3): 517-523.

• Articles • 上一篇    下一篇

Effect of the support calcination temperature on selective hydrodesulfurization of TiO2 nanotubes supported CoMo catalysts

Cuili Guo, Yuanyuan Wu, Xin Wang, Bo Yang   

  1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • 收稿日期:2012-11-27 修回日期:2013-01-29 出版日期:2013-05-20 发布日期:2013-05-31
  • 通讯作者: Cuili Guo

Effect of the support calcination temperature on selective hydrodesulfurization of TiO2 nanotubes supported CoMo catalysts

Cuili Guo, Yuanyuan Wu, Xin Wang, Bo Yang   

  1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • Received:2012-11-27 Revised:2013-01-29 Online:2013-05-20 Published:2013-05-31

摘要: TiO2 nanotubes (TiO2-NTs) were synthesized by the hydrothermal method. Co and Mo active components were supported on a series of the as-prepared TiO2-NTs samples which were calcined at different temperatures. The effects of support calcination temperature of CoMo/TiO2-NTs catalysts on their catalytic performance were investigated for selective hydrodesulfurization (HDS). The samples were characterized by means of the scanning electron microscopy (SEM), the transmission electron microscopy (TEM), N2 adsorption-desorption, X-ray diffraction (XRD), Raman spectroscopy and H2 temperature-programmed reduction (H2-TPR). The experimental results revealed that TiO2-NTs support calcined under 500 ℃ can maintain the nanotubular structure with higher surface area and pore volume. Meanwhile, the obtained supported CoMo/TiO2-NTs catalysts exhibited weak metal-support interaction, more octahedral Mo6+ species and high catalytic performance in selective HDS.

关键词: TiO2 nanotubes (TiO2-NTs), selective HDS, CoMo catalyst, calcination temperature

Abstract: TiO2 nanotubes (TiO2-NTs) were synthesized by the hydrothermal method. Co and Mo active components were supported on a series of the as-prepared TiO2-NTs samples which were calcined at different temperatures. The effects of support calcination temperature of CoMo/TiO2-NTs catalysts on their catalytic performance were investigated for selective hydrodesulfurization (HDS). The samples were characterized by means of the scanning electron microscopy (SEM), the transmission electron microscopy (TEM), N2 adsorption-desorption, X-ray diffraction (XRD), Raman spectroscopy and H2 temperature-programmed reduction (H2-TPR). The experimental results revealed that TiO2-NTs support calcined under 500 ℃ can maintain the nanotubular structure with higher surface area and pore volume. Meanwhile, the obtained supported CoMo/TiO2-NTs catalysts exhibited weak metal-support interaction, more octahedral Mo6+ species and high catalytic performance in selective HDS.

Key words: TiO2 nanotubes (TiO2-NTs), selective HDS, CoMo catalyst, calcination temperature