能源化学(英文) ›› 2013, Vol. 22 ›› Issue (4): 645-652.

• Articles • 上一篇    下一篇

TiO2 supported cobalt-manganese nano catalysts for light olefins production from syngas

Mostafa Feyzia, Asadollah Hassankhanib   

  1. a. Faculty of Chemistry, Razi University, Kermanshah, P. O. Box: +9867149, Iran;
    b. Department of Materials Science, International Center for Science, High Technology & Environmental Sciences, Kerman, P. O. Box: +9876315117, Iran
  • 收稿日期:2012-05-10 修回日期:2012-07-31 出版日期:2013-07-20 发布日期:2013-07-27
  • 通讯作者: Mostafa Feyzi
  • 基金资助:

    This work was supported by the International Center for Science, High Technology & Environmental Sciences.

TiO2 supported cobalt-manganese nano catalysts for light olefins production from syngas

Mostafa Feyzia, Asadollah Hassankhanib   

  1. a. Faculty of Chemistry, Razi University, Kermanshah, P. O. Box: +9867149, Iran;
    b. Department of Materials Science, International Center for Science, High Technology & Environmental Sciences, Kerman, P. O. Box: +9876315117, Iran
  • Received:2012-05-10 Revised:2012-07-31 Online:2013-07-20 Published:2013-07-27
  • Supported by:

    This work was supported by the International Center for Science, High Technology & Environmental Sciences.

摘要: Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese (Co/Mn = 1/1) loading, pH and calcination conditions on the catalytic performance of Co-Mn/TiO2 catalysts for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor. It was found that the catalyst containing 30wt%(Co-Mn)/TiO2 was an optimal catalyst for the conversion of synthesis gas to light olefins especially propylene. The activity and selectivity of optimal catalyst were studied under different operational conditions. The results showed that the best operational conditions were H2/CO = 1/1 molar feed ratio at 250 ℃ and GHSV = 1300 h-1 under atmospheric pressure. Characterization of catalysts was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption-desorption measurements.

关键词: sol-gel, Fischer-Tropsch synthesis, light olefins, operational condition

Abstract: Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese (Co/Mn = 1/1) loading, pH and calcination conditions on the catalytic performance of Co-Mn/TiO2 catalysts for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor. It was found that the catalyst containing 30wt%(Co-Mn)/TiO2 was an optimal catalyst for the conversion of synthesis gas to light olefins especially propylene. The activity and selectivity of optimal catalyst were studied under different operational conditions. The results showed that the best operational conditions were H2/CO = 1/1 molar feed ratio at 250 ℃ and GHSV = 1300 h-1 under atmospheric pressure. Characterization of catalysts was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption-desorption measurements.

Key words: sol-gel, Fischer-Tropsch synthesis, light olefins, operational condition